How do I install crown molding on the ceiling without it falling down?

I have an apartment from 2008 and I want to put plaster moldings on the ceiling in the living room to give it a more elegant touch. The problem is I don't know what adhesive to use or how to secure them properly so they don't end up on the floor. Is there some method that works well or should I just hire someone?

4 answers

★ Best answer

Something not many people mention is making an "adhesive cushion": instead of applying a thin line, you put a thicker layer at the key points of the molding, which increases the contact area and holds more weight while it dries. Combine that with anchor screws (which you cover up with spackling paste afterward) and it's basically failproof. If your ceiling is in bad shape or has cracks, first smooth the surface with construction-grade spackling compound, because adhesive alone won't take care of irregularities. Is your ceiling smooth or textured?

Did you already check the condition of your ceiling? Because that matters a lot for the moldings to hold up.

The most important thing is using the right adhesive - look for a plaster-specific ceiling adhesive (like "cornice adhesive" or "plaster paste") that has good grip. Regular white glue won't work because plaster is heavy. Before gluing, clean the ceiling thoroughly with a damp cloth to remove dust and loose paint - that helps a ton. Apply the adhesive in lines along the molding, press down hard for several minutes, and let it cure completely (read the product instructions, it could be 24 hours or more).

If the molding is heavy or your ceiling is in bad shape, it's worth reinforcing with small mechanical anchors like screws or wall plugs. You can drill into the molding at strategic points without it showing and secure it with the adhesive too. Most people do this and sleep soundly 😅. If you're not comfortable with tools or the ceiling is really damaged, it's worth hiring someone who knows what they're doing - a molding on the floor is a mess and could hurt you if it falls suddenly. A professional charges a fair bit but at least you're safe.

Don't rely on adhesive alone, even if it's good quality - plaster moldings are pretty heavy and they'll peel off over time. What actually works is combining plaster-specific adhesive with anchor screws every 30-40 cm, which you hide afterward with filler. The glue handles the initial weight, but the screws are what prevent them from falling after a few months when the humidity in your apartment affects the adhesion. If you don't feel confident doing it neatly, better to hire someone - it's work that really shows if it turns out badly.

If the ceiling is in good condition, the trick that works best is to prepare it well before gluing - clean the surface thoroughly with a brush to remove dust and old debris, then sand it with fine-grit sandpaper so the adhesive grabs better. After that use a specific adhesive for plaster molding on ceilings (the kind that comes in large tubes) but apply it generously at several contact points, not just a thin line, because the molding is going to be up there for years and needs good grip from the start.

Your answer

Log into answer.