Is it dangerous to throw ice from the fridge away, and why?
Wow, I had no idea there could be any danger in that. What exactly are you talking about? Could something in the fridge get damaged, or is this about something else entirely?
Wow, I had no idea there could be any danger in that. What exactly are you talking about? Could something in the fridge get damaged, or is this about something else entirely?
I once had a bunch of ice build up on the walls of my fridge, and I just started chipping it off in chunks - ended up scratching the copper tube of the evaporator. After that, the fridge worked worse, and refrigerant started leaking. I had to call a repair guy, and he said this is a common problem.
The thing is, there are thin copper tubes with refrigerant running inside the fridge, and they're often located right under the layer of ice. If you start chipping away at the ice with a sharp tool or even just pulling it off with your hands, you can easily puncture or scratch the tube. Even a small hole will cause refrigerant to leak, and the fridge will just stop cooling. The repair costs way more than prevention.
The right way to do it is to unplug the fridge for an hour or two and let the ice fall off on its own, or use warm water to soften the ice before you remove it. No sharp objects. If ice keeps building up, that's a sign the defrost system isn't working properly, and you shouldn't touch it with your hands at all - just call a technician.
The main rule is never to chip ice off with sharp objects. It's genuinely dangerous for your fridge because there can be copper tubes under the ice layer that circulate refrigerant. If you damage them, all the Freon will leak out and your fridge will just stop cooling. Fixing that kind of damage costs a lot, and sometimes it's easier to just buy a new one.
I once tried to get rid of frost buildup in my freezer and almost made a huge mistake. I grabbed a screwdriver and started carefully poking at the ice, or so I thought. But then I remembered reading somewhere about those tubes and got scared. In the end I turned on the defrost mode overnight and everything melted on its own just fine. My fridge has been working without any problems ever since.
The right way to do it is to use warm water or a hair dryer (on low heat) so the ice melts. Or just turn on the auto-defrost mode if you have one. No sharp tools, no boiling water - just take it slow and easy. It'll take longer, but your fridge will stay in one piece.
Yes, there is a real danger, but it's not universal across all refrigerators. In older models, the copper tubing of the evaporator is indeed located close to the surface, and if you damage it, the refrigerant will leak out and the fridge will be dead. In modern refrigerators, the tubing is often protected by a plastic cover or positioned deeper, so the risk is lower, but it still exists. The easiest thing is to just unplug the refrigerator and let the ice thaw naturally over a few hours - it'll take time, but that way no tubing gets damaged.
Log into answer.