5 answers
What's the impedance of each subwoofer you want to connect? Because the real issue is that - if they're two 4-ohm subs wired in parallel, it'll drop to 2 ohms and most 500W amps can't handle that. I've seen people try this at home and the amp would go into protection mode constantly, or worse, actually blow out.
If your subs have higher impedance or if your amp can handle 2 ohms (check the specs), then yeah, it'll work, but you'll basically be using all the power just for the subs. Ideally you'd want an amp with more headroom or use a dedicated subwoofer crossover/amplifier.
Don't make the mistake of connecting two subwoofers in parallel directly to your 500W amplifier thinking it'll work fine. The impedance will drop, the amp might go into protection or get damaged, and the subs won't have enough power to work properly. Each one of them needs a good amount of watts to reproduce bass with quality.
What you need to do is check the impedance of each subwoofer and how they accept connections. If they're 4 ohms each and you wire them in parallel, you get 2 ohms total - many 500W amplifiers can't handle that. The best solution is to connect one at a time or, if the amp supports 2 ohms, split the 500W between the two (roughly 250W each, which is pretty low).
If you really want two subs, the ideal thing is an amplifier with more power, minimum 1000W so you get decent distribution. Or go with an active subwoofer of your own, which already comes with an integrated amplifier - then you don't have all this hassle. Get into the technical documentation of your equipment and check what it supports before you wire everything up blindly.
Technically yes, but you need to check if the amplifier can handle the total impedance of both subs connected. If each one is 4 ohms and you wire them in parallel, it drops to 2 ohms - most 500W amps aren't built for that and will go into protection mode or burn out. The safe way is to connect just one sub or use an amplifier specifically designed for subwoofers that has RCA inputs and gain control, that way you can distribute the signal better.
The real secret is not to think of those 500W as a fixed amount you split between two subs - what matters is the total impedance the amp will see. If you have two 4-ohm subwoofers and wire them in parallel, the impedance drops to 2 ohms, and then most 500W amplifiers start to complain or go into protection mode because they weren't designed to handle that load. Your best bet is to check your amplifier's specs for the minimum impedance it can handle - if it says it only works with 4 ohms or 8 ohms minimum, two subs in parallel are gonna cause problems.
The wattage isn't really the main issue here - it's the impedance. I connected two 4-ohm subs to my 500W amp thinking it would be fine, but when I wired them in parallel it started making weird noises and went into thermal protection - ended up frying the amp. If your subs have series input or if your amp can handle 2 ohms (which is what happens when you wire two 4-ohm ones in parallel), then yeah it'll work, but if it doesn't have that minimum impedance spec, you risk burning out the equipment.
Your answer
Log into answer.