9 answers

★ Best answer

The main thing is that 92 degrees isn't throttling yet - the GPU is still running at full power instead of dropping its clocks. If your fps is stable and there are no artifacts, then that's just how top-tier chips are under max settings in 2026 - they get hot, that's the price you pay for performance.

For NVIDIA graphics cards, such temperatures are within the acceptable range, but close to the upper limits. The RTX 5080 is designed to operate up to 83 degrees at Tjunction (that's the chip's working temperature), and anything above that already causes performance throttling. If you've got 92 degrees on the core, that's already a problem that will hurt performance and shorten the card's lifespan.

The first thing to check is how well the graphics card is pressed against the heatsink. Often the thermal pad between the core and the heatsink is mounted incorrectly or even shifts during installation. You need to disassemble the graphics card (if that doesn't void the warranty) and see if the heatsink is making full contact. If you notice the contact is incomplete or the paste has dried out, replace it with fresh thermal paste - something like Noctua NT-H2 or Thermalright TF8 works well. Second thing - make sure the fans are spinning at maximum at these temperatures. At 80-90% they should keep the card cooler, but there could be dust clogging the radiator, though you mentioned the case airflow is decent.

If you've checked all this and the card is still running hot, it might just be how that particular unit is or a flaw in the cooling design. In that case, it's worth considering adding an external fan (like a Noctua NF-A14) to the heatsink, or even moving the card to a cooler spot in the case if there's room.

Don't panic and don't take your graphics card apart - 92 degrees at max settings in Cyberpunk is totally normal, new flagship chips just run hot under load like that. If your fans are spinning at 80-90% and your case has decent airflow, then your mounting and thermal paste are fine, that's just how this card behaves.

At 92 degrees, your graphics card is already running under stress, and while that's technically within the official specs, I wouldn't jump to the conclusion that this is just how top-tier chips operate. First, check that the graphics card is properly seated in the slot and there are no gaps between the coolers and the chip (sometimes the retention clip doesn't fully lock on the first install). If everything's sitting tight, try reproducing that temperature in other demanding applications - if you're hitting 92 everywhere, then it's probably just how your particular model behaves under full load, especially if your fps is stable and you're not getting any crashes.

92 degrees is at the edge of the normal range, but it's not critical. Your graphics card won't be damaged, but you're working with only a few degrees of thermal headroom, which isn't ideal. At maximum settings in such a demanding game, high temperatures are expected, but it makes sense to try lowering them a bit.

First, check the obvious stuff: make sure the protective film has been removed from the heatsink (I know it sounds dumb, but it happens), and that the graphics card is seated firmly in its slot. If everything's fine, try reducing power a bit through MSI Afterburner or similar software - usually a 10-15% TDP reduction barely affects performance but temperatures drop noticeably. Another option: lower texture quality or disable ray tracing if it's maxed out.

Here's what people often miss: check whether the heatsink is clogged with dust. Even with good airflow in the case, the graphics card's heatsink itself collects dust very quickly, and this significantly impacts heat dissipation. If your graphics card has been running for a month or two, it's worth checking if everything's clean. Carefully blow the dust out with compressed air - often this gives a noticeable temperature drop without having to take the card apart.

Before you open it up, try moving your graphics card to a different PCIe slot (if your motherboard allows it) - sometimes the contacts get oxidized or don't make good contact, which reduces cooling efficiency. If the temperature drops by even 3-5 degrees, then that was the issue.

Another tip: bump up your fan speeds to at least 30-40% even at idle - it helps keep your whole cooling system in shape and prevents temperature spikes under load. A lot of people leave it on auto mode, and then the fans suddenly ramp up from zero, which causes noise and thermal stress.

First, make sure your graphics card has some clearance from other components - people often forget that RTX cards need good air circulation not just in front of the fans, but behind them too. Check if the heatsink fins are clogged with dust (blow them out with compressed air without taking the card apart). If the temperature doesn't drop at least 3-5 degrees after that, then don't worry about it - 92 under that kind of load is totally normal, and your card will last a long time.

Before you start looking for problems with the mounting or thermal paste, try a simple test - check how much dust has built up inside the GPU cooler. Dust in the fins is really effective at blocking heat dissipation, and sometimes just a can of compressed air is enough to bring the temperature down a few degrees. If that doesn't help and your graphics card is running stable without glitches or performance drops, then 92 degrees is kind of normal for top-tier chips under full load, but it's in the danger zone where you can start to worry.

92 degrees is really at the edge of what's acceptable, and fans already running at 80-90% means the system is working almost at its limits. If the game got any more demanding or the room temperature went up, the graphics card would start throttling performance. Right now it's running stable, but there's no headroom.

Here's the thing people often miss: make sure air is actually being pulled out of the case effectively. Good airflow isn't just front-panel fans - you need exhaust at the back and top too. If the graphics card is sitting close to other components (CPU, power supply) or there are cables in the way, hot air can just recirculate. Try temporarily opening the side panel of your case and running the game - if temps drop by 5-10 degrees, that's your ventilation problem right there.

As for mounting and thermal paste - unlikely on a new card, but you can check if the heatsink is properly seated, especially if the card is mounted sideways (make sure it's pressed down tight). If that's fine, either get some more powerful case fans or run the game on slightly more balanced settings, like high instead of ultra graphics. That'll drop temps by 10-15 degrees, and you won't notice any visual difference.

Your answer

Log into answer.