Radiators not getting warm - only air coming out the top

BA bauer1988 DE 🔍 Enthusiast 👁 178 ⚑ Report Heating

For about a month now I've noticed that my radiators in the apartment barely get warm anymore. Mostly just air coming out of the top instead of water. I've already tried turning the valves all the way, but that didn't help. What can I do myself before I call a tradesman?

4 answers

★ Best answer

Air in the radiators is actually the most common problem, and you need a bleed valve for that (the little screw on the top side of the radiator) - you can open it real easy with a flat screwdriver or a special bleeding key, just until water comes out, then close it again. For me that did the trick half a year ago and the things were warm again after that, so definitely try that first before you call someone.

Don't just randomly fiddle with the valves and open up your radiators from the top - that usually makes things worse and you might end up with water everywhere. Air in the radiators is actually the classic problem, and you can often fix it yourself.

Try turning the heating up all the way first and then just wait - sometimes air bubbles disappear on their own once the system's running properly. If that doesn't help, you need a bleed valve. That's the little screw at the top of the radiator, usually with a small head. Grab a small wrench or a radiator key (costs almost nothing at the hardware store), put a bowl underneath it, and turn the thing slowly. Air comes out first - hissing and sizzling - then after a bit water comes out. As soon as water starts coming, turn it right back off. Do this with every radiator that isn't getting warm properly.

If that doesn't work either, it's probably a problem with the pump or expansion tank in your heating system, and then you're gonna have to call someone. But try bleeding them first - it's already helped me tons of times and it's really not rocket science.

I had exactly the same problem - my radiators never got properly warm and only air came out the top. The bleed valve (the little screw on the side) usually helps with that, but make sure you put a cloth or bowl underneath first, because water can spray out quick. An important thing a lot of people miss: if you've got multiple radiators that aren't working right, you need to start with the lowest one and work your way up - otherwise you're just pushing the air further up instead of letting it out. If that doesn't work, it could also be that your heating pump is having issues or the pressure in the system is too low - then you really need to call a professional.

The bleed valve is definitely your first stop - just turn that little screw at the top of the radiator half a turn or a full turn and wait until water comes out instead of air, then turn it back. Important: hold a cloth or a small bowl underneath it, because the water sometimes splashes and can damage your wall or floor. If that doesn't help and your heating's just sluggish overall, it could be that the whole system needs bleeding - you normally do that from the bottom of the radiator or at the boiler, and honestly I'd get a professional in for that to make sure it's done right.

Your answer

Log into answer.