2 answers
Filling up the tank completely isn't necessarily better - with ethanol-blend fuel (E10), it can actually become problematic because water settles and causes corrosion. The stabilizer approach is right, but then a half-full tank is completely sufficient. Much more important: bring the tire pressure up (otherwise you'll get flat spots), remove the battery or connect it to a trickle charger, and jack the bike up on a block so the wheels don't sag. It should be stored somewhere dry and ideally temperature-stable - a garage is better than outside under a tarp.
The most important thing is to fill up the tank completely or treat the bike with fuel stabilizer - an empty or half-full tank will rust from the inside, and that gets really expensive to fix. With a full tank you minimize the humidity inside the tank, or you use a fuel stabilizer if you're not riding the motorcycle for several months. You should also change the oil beforehand, because used oil contains acids that will attack your engine over the winter.
Then take care of the rest: remove the battery or connect it to a trickle charger - a deeply discharged battery is often done for. Reduce tire pressure by about 0.5 bar so the tires don't get flat-spotted. Grease the chain, treat all exposed areas with oil (headlight, mirrors, anything that rusts), and cover the bike with an appropriate cover - not airtight, but protected from dirt and moisture.
Store it in a dry place, ideally on the center stand or a work stand so the full weight doesn't sit on the tires. If possible, ventilate the space regularly. Come spring, start up slowly: charge the battery, check the oil, do a few test rides before you're back to riding properly.
Your answer
Log into answer.